Modern Dental Treatment and Prosthetics Technologies
Dental treatment under the policy of the OMC prosthetics does not apply. But the service is in demand because of the generally accepted standards of appearance and the desire to bring back the beauty of the smile. The method of prosthesis selected based on the overall health and condition of the oral cavity, the number of decayed teeth, jaws and individual structure of the patient’s wishes.
Dentures set at extended defects dentition or its absence. These advantages include low cost, which is not true of fixed structures and implants. In the installation process takes a minimum of time. Removable prosthesis for restoring a smile in a short time. It can be clasped, acrylic or nylon. The last option is the most safe in terms of allergies. To quickly get used nylon products. Their disadvantage – a shorter life than, for example, with acrylic models.
This method of restoring teeth is good because it takes less time to adapt. Installed prostheses can not be removed independently. They do not need special care and completely replace the natural chewing surface. Used to restore a few, or even one tooth particles.
Tabs- Similar seals small prostheses adjusted deep cavities and heavily damaged tooth portions. Made-to-measure tabs fixed with cement.
Veneers- Installing thin ceramic plates on a special adhesive topical cosmetic defect with individual teeth in a row. They can be different colors or shapes, destroyed the outer surface.
Crowns- We put on the remains of decayed teeth or artificial root – implant. In appearance, it is best to mimic the protruding part of the tooth above the gum zirconium crowns.
Bridges- Bridges consist of several artificial crowns and attached to the abutment teeth, limiting defect number.
Implants are, in fact, screws threaded, replace the tooth root and provide support for the installed artificial crowns. Implantation of the implant in the gum is carried out mainly under local anesthesia. Procedure tolerated easier than the removal of teeth.